

| Mainframe | 24" Fabricated main beams with 2" camber, 1/2" x 6" top and bottom flanges in the rear portion of the trailer with 1/4" web welded on both sides. 1/2"x 6" Top flange and 5/8" x 5" bottom flange in the neck. All flange and web material is high strength steel. |
| Crossmembers | 4" X 3.2# Jr. I beam on 26" centers. Formed angles on top of the main beams and siderails serve as cage nesting devices and provide a 4-3/4" air space between the cages. |
| Kingpin | 2" SAE kingpin, 3/8" kingpin plate, 36" kingpin setting (standard). |
| Siderails | 6" x 8.2# (Inverted) structural channel. Two nesting devices between each formed angle. |
| Suspension | HUTCH H9700T three point spring suspension with hi-arch heavy duty 3 leaf springs. |
| Axles | (2) 25,000 Lb., 5" round, 5/8" wall. |
| Brakes | 16-1/2" x 7", Type 30/30 brake chambers, outboard drums, Meritor WABCO (2S/1M) ABS on one axle. |
| Wheels | 8.25 x 22.5, Steel 10 hole disc; hub piloted (Color:white). |
| Landing Gear | Holland Mark V 2 speed gear with 62,500 lb. lift capacity; 200,000 lb. static capacity (standard). |
| Finish | Poultry special trailers are shotblasted and primed with zinc-rich primer and top coated with a high solid polyurethane paint. Colors: black, red or cat yellow (standard). |
| Floor | 10 ga. Steel is standard over the kingpin and tandem areas only. |
| Lights | 7-Way main receptacle, sealed wiring harness, rubber mounted LED lights. 3 Lights per side including mid turn (4 Light cornering system and back-up lights are available). |
| Tandem | 105" Tandem setting from the rear of the trailer with 49" axle spacing. Optional settings are available. |
| Tiedowns | 3/4" Tie bar located under the crossmembers running the full length of the trailer for chains and binders. |
| Rear Bumper | The Poultry special comes standard with a DOT certified rear under ride guard/bumper and high visibility reflective conspicuity tape. |
• Air ride suspension
•
Front and rear bulkheads full width and height
•
Rear bulkhead 3/4 width & height
•
Fully floored with 10 ga. steel
•
(22) 4" Weld on winches
•
(22) 4" Bolt on winches
•
1" Pipe tie bar under siderail in lieu of standard 3/4 tie bar
•
Optioan paint colors available
•
Polished or machine finish aluminum wheels
•
D-rings