Kubota liquid cooled V3307-CR-TIE4B with 74 HP is the perfect match for the three wheel hydrostatic drive. The Final Tier IV engine is equipped with glow plugs, and an overheat and low pressure shut down device.
- Type: 4 cylinders in-line
- Gross power (@ 2600 rpm): 74.3 HP (55.4 Kw)
- Fuel tank capacity: 33 US gal. (125 l)
- Hydraulic main tank capacity: 25 US gal. (94.6 l)
The Rexroth AA4VG hydrostatic pump combined with Poclain drive motors is the perfect match to give you the most efficient machine possible. The hydrostatic system includes a high-quality pressure filter to increase life expectancy.
The forklift uses the hydrostatic as the main braking system and a spring applied and hydraulic release emergency/parking brake. Using the hydrostatic as brakes gives you a maintenance free system.
The one-piece all steel welded construction makes a very rugged and rigid chassis. Wide and low profile frame provides a stable machine. Exceptional maintenance and service access, due to extra-wide hinged type doors and removable hood, as well as sensible layout of major components and service points.
The two-stage mast is standard. The lift chains are of multiple-leaf construction with convenient adjustment points.
- Hydraulic lift cylinders: Two 2-3/4″
- Hydraulic tilt cylinders: Two 3-1/2″
- Hydraulic side shift cylinder: One 2-1/2″
The 45-1/2″ wide high-capacity pin type carriage is standard.
The pin-type forks are made from high-grade treated steel. They are pin mounted to allow for variable fork spread. The standard forks are 72” long by 4-3/4” wide and 1-3/4” thick.
One gear type pump directly mounted on the hydrostatic pump. In-tank suction strainer and easy to replace tank top high-quality return filter ensure clean oil. The sectional control valve is easily accessible and hydraulically controlled with a joystick. The joystick makes this system as user friendly and easy to control as possible.
Hydraulic system delivers constant oil flow to hydrostatic steering system for uniform steering response. The steering cylinder is a 3″. Rear wheel pivot is heavy duty slewing bearing.
- Front: 300 x 15 22 PLY (tube type)
- Rear: 300 x 15 22 PLY (tube type)
The fully enclosed, ergonomically designed operator cab features a digital instrument panel, a foot throttle, a forward and reverse pedal control, fan, heater, a main electric switch and a heavy duty ergonomic seat with seat belt. Cab is also equipped with front and rear wipers, and tilting steering wheel. A summer door is optional.
Complete instrument panel
Digital display with engine speed, load, temperature and hours, as well as battery voltage and fuel level gauge. Panel also includes an air filter restriction indicator light. The electrical system is protected by fuses, which are installed in an easily accessible service box.
- Electric horn
- (4) LED white working lights
- (2) LED back up lights and back up alarm
- Model: BD3-7570
- Height: 97-1/2″ (Top of Cab)
- Length (rear to face of forks): 105″
- Wheelbase: 80”
- Width: 91-1/2″
- Approximate Weight: 12,200 lbs.
- Basic Rated Capacity: 7,000 lbs. @ 24″ load center
- Lift Capability = 144″
- Overall Height Lowered = 103 1/2″
- Overall Height Raised = 174 1/2″
Contact a sales rep today to discuss optional configurations to meet your specific needs.